Projects About Contact
0483 092 615 Get a Quote
Concrete driveway poured by Select Civil Group on a property in Point Lonsdale

Bellarine Peninsula

Concrete Driveways in Point Lonsdale

Concrete driveways and crossovers for Point Lonsdale homeowners and builders. Plain finishes, exposed aggregate, coloured or stencilled concrete. Built for the coastal climate. Quotes back within 24 hours.

Get a Point Lonsdale Quote Call 0483 092 615

Concrete Driveways for Point Lonsdale Homes

Point Lonsdale is a relaxed coastal village near the tip of the Bellarine, with beach houses and permanent homes on sandy, sometimes limestone-based coastal ground. Driveways here need to handle that underlying variation in the base - proper sub-base preparation and the right mix for the ground conditions make the difference between a pour that lasts and one that fails in a few years.

Select Civil Group pours concrete driveways across Point Lonsdale, Queenscliff, Wallington and the wider Bellarine Peninsula. From plain broom finishes through to exposed aggregate, coloured and stencilled work. Every job includes proper site prep, drainage planning and a finish chosen to suit the property.

Concrete and Site Services for Point Lonsdale

The driveway is rarely the only concrete job on a site. Here is what Point Lonsdale homeowners ask us for most.

Concrete driveway by Select Civil Group in Point Lonsdale

Concrete Driveways

Plain broom, exposed aggregate, coloured or stencilled finishes. Built for the weight of vehicles, the coastal climate, and the look you want at the front of the property. We coordinate the crossover with the council where required.

Quote my job →
Concrete paving in a Point Lonsdale backyard

Concrete Paving

Paths, patios, pool surrounds and outdoor areas in matching or contrasting finishes. Often poured at the same time as the driveway to keep colours and finishes consistent across the property.

Quote my job →
Site cut for a new build in Point Lonsdale

Site Cuts

Precision cut and fill to engineering levels, ready for footings and slabs. Useful on Point Lonsdale sites where sandy or limestone-based ground needs proper addressing before the driveway can be poured.

Quote my job →
Retaining wall on a Point Lonsdale block

Retaining Walls

Concrete retaining walls where a driveway needs supporting earth beside it, or where landscaping changes the level. Engineered for the load and the soil.

Quote my job →

How a Point Lonsdale Job Runs

Quote to handover, the same six steps on every job. No surprises, no scope creep, no chasing for updates.

Step 01

Enquiry

Send the site address, a quick description of the work, and any plans or photos you have. The more we know, the sharper the quote.

Step 02

Site Walk

For larger jobs, we visit the block to check access, soil, levels and obstacles the photos don't show. Most quotes come back within 24 hours.

Step 03

Fixed Quote

Itemised, written, and locked in. Spoil cartage, disposal and machinery are accounted for so there are no surprises at the end.

Step 04

Programmed Start

Confirmed start and finish dates that we hold to. We coordinate with your builder, engineer, or following trades so the ground is ready when they are.

Step 05

On Site

Machine and operator on the ground, working to your engineer's specs. Daily check-ins with whoever is coordinating the build.

Step 06

Handover

Final levels checked, site cleaned, and your site is ready for the next stage. We are still a phone call away if something comes up later.

Around Point Lonsdale

Point Lonsdale sits at the tip of the Bellarine and is part of our regular peninsula run. Most weeks we are working across the surrounding coastal villages and inland towns.

Point Lonsdale

Queenscliff

Ocean Grove

Swan Bay

Wallington

Marcus Hill

Bellarine

Drysdale

Portarlington

Barwon Heads

Leopold

Geelong

Frequently Asked

The questions we get most from Point Lonsdale homeowners and builders.

Yes. Point Lonsdale, Queenscliff, Ocean Grove, Wallington, Drysdale and the surrounding Bellarine suburbs are all within our core service area. We pour driveways across the peninsula regularly.

Cost depends on the size, the finish (plain broom is the cheapest, exposed aggregate and stencilled are higher), site access, drainage requirements and whether a new crossover is needed. We give an obligation-free quote within 24 hours once we have the site details.

Most residential driveways take two to five working days from site set-up to clean-up, including formwork, prep, pour and curing. Larger driveways or jobs that involve a new crossover or retaining can run longer. We confirm a programmed start and finish date as part of the quote.

Plain broom, exposed aggregate, coloured (oxide), and stencilled or stamped patterns. Each has different cost, look and maintenance profiles. We can show finished examples that suit Point Lonsdale streetscapes and help you pick what works for the property.

Yes. Where a new or upgraded crossover is required, we coordinate the application with the City of Greater Geelong and pour the crossover to council spec. Existing compliant crossovers we can work with as they are.

Yes. Select Civil Group carries full public liability insurance and workers compensation cover on every job. Certificates of currency are available on request.

Need a Concrete Driveway in Point Lonsdale?

Send the address and a quick description. We will come back with an obligation-free quote within 24 hours.

Get a Free Quote Call 0483 092 615

Get a Point Lonsdale Quote

Tell us about your driveway and we will get back to you within 24 hours. Fill out the form, call us on 0483 092 615, or email andrew@selectcivilgroup.com.au or admin@selectcivilgroup.com.au

Phone

0483 092 615

Email

andrew@selectcivilgroup.com.auadmin@selectcivilgroup.com.au

Service Area

Point Lonsdale, Geelong, Bellarine

Hours

Monday - Friday: 7:00 AM - 5:00 PM

We respond within 24 hours on business days.

Call Get a Quote